1. Model: SD-100 Manual Dispenser
Main features and parameters
1. Digital time display adjustable gel time of the node
2. Equipped with plastic to prevent leakage of the vacuum sector
3. Manual / automatic dispensing features two modes
4. Applicable to manual control or foot control
5. Power: AC220V, 50Hz, 15W
6. Dispensing accuracy: ± 0.001ml; frequency: more than 800 beats / min;
7. Pressure setting: a plastic pressure 0.05 ~ 0.80MPa
8. Vitality of imports of major
2. Model: SD-200 Manual Dispenser
Main features and parameters
1. Equipped with plastic to prevent leakage of the vacuum sector
2. Optional hand control or foot control
3. LCD information display can be set free to function
4. Equipped with manual / auto / cycle features three modes of dispensing
Unique circulatory function, so that high frequency of dispensing easier
5. The basic vitality of all imports, fine adjustable
5. Dispensing accuracy: ± 0.001ml? Dispensing frequency: more than 800 times / min
6. Power: AC220V, 50Hz, 18W
7. Pressure setting: 0. ~ 0.80Mpa
3. Model: SD-300 Manual Dispenser
Main features and parameters
1. LCD information display can be set free to function
2. Standard equipment to prevent leakage of the vacuum body gel
3. With manual / auto / cycle features three modes of dispensing
4. Optional hand control or foot control
6. Figures show that the pressure adjustment, all components imports, fine adjustable
7. Unique innovative features:
A, the memory mode: hold down a key while riding switch is a rubber timing, release automatically saved this time, after time the plastic can be here.
B, multi-point mode: save 8 times less than 8 points can be set manually or manual cycle mode, each point of the plastic are different.
C, compensation mode: the gel can be sustained Ascending or descending for each point.
5. Dispensing accuracy: ± 0.001ml dispensing frequency: more than 800 times / min
6. Power: AC220V, 50Hz, 18W
7. Pressure setting: 0. ~ 0.80Mpa
4. Model: DD-100 electric dispenser
Main features and parameters
No gas supply, gas supply or gas to avoid the on-site source of instability
Using unique high-speed pulse circuit, so that a substantial increase dispensing accuracy
Electrodes to promote the adhesive, good consistency, the same applies to the high viscosity glue
Just power, equipment, small vibration
5. Model: RD-200 Peristaltic Dispenser (Instant adhesive / Quick Adhesive Dispensing)
Main features:
* Wear-resistant rotor with unique mechanical device, saving supplies
* LCD display with backlight, dispensing parameter display clear
* Operation more convenient finger switch control
* No pressure, easy to operate
* Up to 0.1 degree accuracy peristaltic dispensing volume
* Has function keys for easy setup parameters
Instant adhesive for / use Quick Adhesive
Technical parameters:
Function modes: automatic quantitative mode / manual mode
Minimum dispensing volume: 0.0001mL
A plastic speed (rpm): 0 ~ 200 r / min
Repeatability: ± 0.005%
Special features: plastic to prevent leakage of adjusting the settings using the vacuum
Dimensions: 218mm × 118mm × 98mm Weight: 1.5KG
C. Manual dispenser for fluids:
Solder paste, silver paste, UV curable adhesive, lubricants, epoxy, fast curing adhesive, silicone resin and other materials
D. Manual dispenser for Industry:
Plug connection, the phone keypad, remote control button, VCD, DVD bald, head, IC, transistor, diode, LED, printed circuit boards and other electronic components, micro-motors, watch, speakers, cameras, head, optical machinery, and other high precision machines precision operations situations spit gum
Daheng LED Manual Dispenser