Hangzhou ZJU Interlogic Co.,Ltd

Product Description:
10WLED fluorescent light more brighter than traditional fluorescent lamp 40W, 15W LED Fluorescent light than traditional 60W fluorescent lamp also, LED fluorescent light in particular, appear to be more soft and more people access to the grant. Life in 50000 -8 million hours for the supply voltage of AC85V-260V (AC), no starter and ballast, quick start, low power, no flash, not easy to visual fatigue. It is not only more environmentally friendly energy superpower. Is a national green energy-saving lighting products developed by one of the key, is to replace the traditional fluorescent lamp of the main products.
LED fluorescent light installation is relatively simple, it points to two kinds of internal and external power supply, power supply built-in LED fluorescent light installation, remove the replace the original LED fluorescent lamp, ballast and starter will be removed to 220V AC power can be directly added to the LED lamp at both ends. External power LED lamp with a special lighthouse general, the replacement of the original can be used.
LED fluorescent lamp energy saving of up to 80% lamp life 10 times more than ordinary, almost maintenance-free, there should always replace the lamp, ballast, starter problems, about half a year down the cost savings can exchange costs. Environment-friendly semiconductor light source, light and soft, pure spectrum, in favor of workers vision care and physical health, 6000K cold light source gives the feeling of cool visual to help focus and improve efficiency.
LED fluorescent light and ordinary fluorescent light compared with the following advantages: energy efficiency. Long life, fitness is good, because the size of a small single LED can be made into any shape, response time is short, environmental protection, no harmful metals, waste easier to recycle, color brilliant, luminous, pure color, a narrow spectral range, and through the red, green and blue color blending into a colorful or white.
Comparison of LED lamp and LED lamp with an ordinary fluorescent disadvantages are as follows: the price of your current energy efficiency and generally do theoretical light efficiency of light there is a great gap between the life of the present can do a big gap between life and theory. Or have some heat, light failure can also significantly reduced.
Specific advantages:
1, environmental lighting, protection of the Earth
Traditional fluorescent lamps contain a lot of mercury vapor, if broken mercury vapor into the atmosphere is volatile. But do not use the LED lamp is mercury, and LED products do not contain lead, play a protective effect on the environment. LED fluorescent recognized as the twenty-first century, the green lighting.
2, efficient conversion, reduce the heat
Traditional lamps will produce a lot of energy, and LED lighting is all the energy is converted to light, will not cause waste of energy. But also documents, clothing does not produce bleaching phenomenon.
3, quiet comfort, no noise
LED lamps will not produce noise, precision electronic instruments for the use of the occasion is a good choice. Suitable for libraries, offices and the like occasions.
4, soft light, protect your eyes
Traditional fluorescent lamp using AC, it will have 100-120 times per second strobe. LED lighting is the direct conversion of AC to DC, no flicker, protect the eyes.
5, no UV, no mosquitoes
LED lamps do not produce ultraviolet light, so lighting will not be as traditional as a lot of mosquitoes around the light source side. Room will become more clean and sanitary and clean.
6, voltage adjustable 80V-245V
Traditional fluorescent lamps is released through the rectifier high voltage to light, and when the voltage is lowered, you can not light up. The LED lamp in a certain range of voltage can be lit within, but also adjust the brightness.
7, save energy, live longer
LED fluorescent lamp power consumption is the traditional one-third less, life is 10 times the traditional fluorescent lamp can be replaced without the need for long-term use, reduce labor costs. More difficult to replace for the occasion.
8, solid solid, long-term use.
LED lamp body itself, rather than using a traditional glass epoxy resin, more robust solid, even hit the floor LED will not easily damaged, can be safely used.
9. Compared with ordinary fluorescent lamps, LED fluorescent lamp without ballast, no starter, no strobe.
10 maintenance-free, frequent switching will not cause any damage.
11. A safe and stable quality can withstand high voltage heat 4kv can work in low temperature low temperature -30 ℃ 55 ℃.
12. No impact on the surrounding environment. No ultraviolet and infrared, there is no hazardous materials such as mercury, eye protection, and no noise.
13 .. good anti-vibration, easy to transport.