chengduhuihongxing

Keywords: color 9MM exposed light string, LED exposed light straw color, light exposed punching, punching exposed lamps, LED waterproof light exposure, F5 monochromatic light exposure, the exposed flat monochromatic light 1 Features: The product the lattice light source, adapted to high-rise buildings and billboards, the exposed printing of letters, all kinds of lighting the outgoing light. Externally by a cylindrical lamp mold injection molding the body, to waterproof, anti-UV, anti-aging, easy installation, beautiful appearance, effectively extending the lamp and led the life; provide an effective UV waterproof, easy installation, high brightness, can install a different color SMD LED, and the beautiful appearance of new points of light. 2, the installation: The product is used for the lattice light punching board practices. With easy installation, high brightness, security, energy saving, long life, failure to reduce and so on. For high-rise buildings and billboards, exposed light word, printing, plastic characters, a variety of lighting inside and outside light sources. Floor level can choose the spacing of lights, lamps and lights from the center of the most suitable for the 2cm ~ 4cm, punching diameter of 8.2mm. Features: The product is used for the lattice light punching board practices, with easy installation, high brightness, security, energy saving, long life, low attenuation, etc., suitable for high-rise buildings and billboards, the exposed light-emitting character printing, plastic characters , a variety of light sources inside and outside lighting. According to floor level. Word size fonts and different customer requirements in four areas to choose the spacing of lights, lamps and lights from the center of the 3cm-6cm suitable for a maximum of not more than 10 cm. The smaller the number the more light spacing, spacing relative proportion of light quantity is small. Wiring: 50 lights by one each loop, all lights 50 and the first thread and then connect a 5V supply. And pay attention to all the lights to the power line can not be too long, all of its cable lines can not be too small, must be greater than 1 square meter line, customers often find that the brightness of side lights and the lights and the other side there differences, it is likely the wiring is not in accordance with 50 one-loop or bright light that is not too far away from the power supply, or the line is too thin to use. Second, the total power switching power supply must be greater than or equal to the total received light amount of power above 120% of the total power of 3, the product production parameters: 0.1 W rated power voltage (output voltage) 5 V Current 0.02 A brightness 230-250 lm lamp hole diameter 9 mm 9 mm diameter anti-attenuation 1000 hours 8% -10% Operating Temperature Range (Operating temperature range) -40 ℃ to +80 ℃ Storage Temperature Range (storage temperature range) -40 ℃ to +100 ℃ (color: red, yellow, blue and white) 4, other information in English for more detailed product information, product quality certification (CE), Environmental Report (SGS), please contact us. 5, Contact: Mr. Bai 189 2743 7538 028-6420 8088 QQ: 1261666047 E-mail: baihaiquan1986@163.com Address: Sichuan Chengdu Jinniu Chadianzi Jiulidi Oasis West Side Road 6 bridge Yi Jing C, a 1001